Nova-tech GC Indicator Manual de usuario descargar pdf (Pagina 9)

P a g e

3.3 CONNECTION

This indicator must be connected to a load cell platform and calibrated as necessary

to match the platform and user requirements.

The GC has a connector configured for either 4 or 6 wire load cells. Connect the

load cells/platform to the indicator as shown below. The cable length should be as

short as possible, using a large size wire to minimise errors due to resistance in the

leads.

Figure 1A shows the connections to a 6 wire load cell. Figure 1B and 1C show 2

different ways to attach a 4 wire load cell, 1B uses a 6 conductor cable to go from

the indicator to the platform or load cell where it connects to the 4 wires from the

load cells.

The Excitation and sense wires are connected internally in the GC indicator.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 43 44

Sin comentarios

Nova-tech GC Indicator Manual de usuario Pagina 9