Nova-tech GC Indicator Manual de usuario descargar pdf (Pagina 18)

P a g e

7.1 SETTING

• Display will show “F2” “Pin”. This parameter allows setting of a new

password number. The default password is “0000”.

• Press [Tare]. The “Weight” display will show "Pin 1".

• Enter the new password number. The “Unit Weight” display will show

dashes. Press [Tare].

• The “Weight” display will change to "Pin 2 ", Enter the password again

and press [Tare].

• The display will show "donE" to show the new password has been

accepted and will return to the menu. Record the new password in a

secured place.

• To exit a parameter, press the [Zero] key.

7.2 ENABLE

WEIGHING

UNITS

• Display will show “F3” “Unit”. This parameter allows weighing units to be

enabled or disabled. If enabled the weighing units will change when the

[U.Wt./Unit] key is pressed. See section 6.0.

• To enter this function press the [Tare] key.

• The display will show the first weighing unit and if it is currently On or

Off. Press the [U.Wt./Unit] key to change the setting and then press

the [Tare] key to go to the next weighing unit. The weighing units

selected will depend upon the model and the capacity of the scales.

See Section 12.2, Service Parameters.

• Press the [Zero] key to return to the weighing mode.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 43 44

Sin comentarios

Nova-tech GC Indicator Manual de usuario Pagina 18