Nova-tech Density Kit for Adam PW and PGW Series Manual de usuario

Adam Equipment AE DENSITY DETERMINATION KIT (For PW and PGW BALANCES) (P.N. 8290, Rev. A2, January 2007) © Adam Equipment Company 2007 1

APPENDIX A A method to determine the volume of the float To determine the volume of the float the following equation can be used. V © Adam

APPENDIX B DENSITY OF DISTILLED WATER WATER TEMPERATURE DENSITY 0ºC 0.99984 g/cm34ºC 0.99997 g/cm310ºC 0.99970 g/cm315ºC 0.99910 g/cm320ºC 0.998

ADAM EQUIPMENT is an ISO 9001:2000 certified global organisation with more than 30 years experience in the production and sale of electronic weighing

© Adam Equipment Company 2007 2

1.0 INTRODUCTION The Density Determination Kit from Adam Equipment allows the users of PW and PGW series of balances to determine the density of sol

3.0 COMPONENTS The kit consists of the following components- 1. Glass Float of known volume, with One unit 2. String 3. Hook 4. Ther

4.0 INSTALLATION • Replace the original pan with the pan and hanger (7) supplied with the kit. NOTE: For the kit supplied for PGW, the pan with

5.0 MEASUREMENT OF SOLID DENSITY To perform the density of solids test, the user must have a method to immerse the solid item in a chosen liquid.

density (g/cc) using the numeric entry method • Press [Enter] to continue • The balance will request for the weight of the sample in air by displ

• When “DENSITY LIqUId” is displayed, press [Enter] • The volume will be asked for. Enter the volume using the numeric entry method or continue u

• Be certain any air bubbles are removed. • Dry the sample completely between tests. • Be very careful not to transfer water to the top pan when