Nova-tech 5095 TRACEABLE COUNTDOWN CONTROLLER Manual de usuario descargar pdf

Traceable

SPECIFICATIONS

14 programs per day or per week.

Minimum switching time: 1 minute

Ratings: ISA — I 2OVAC

Maximum resistive load: 1,800 Watts

SETTING THE CLOCK

In the clock mode, the timer displays as shown in Figure 1. Note that the colon is

flashing and the word CLOCK appears on the LCD. To set the current time and day,

press the SET key, the DAY is flashing and the LCD appears as shown in Figure 2.

Use the left/right arrow keys ( < > ) to select the current day, then press the SET key.

The HOUR is flashing, use the left/right arrow keys to select the current hour, then

press the SET key. Now the MINUTE is flashing, use the left/right arrow keys to select

the current minute, then press the SET key. The SECOND will flash. Press the right

arrow key ( > ) to set the time to the start of next minute, while press the (left arrow key

( < ) to set the time to the start of current minute.

For example, when the time displayed is 3:16:22 and the second is flashing. Press the

right arrow key will set the time to 3:17:00. Press the left arrow key to set the time to

3:16:00

To change from 12 to 24-Hour Display or vice versa, press the RND key in the Clock

setting mode.

During the setting procedure, If the left or right arrow key is depressed for longer than I

second, the key will repeat itself. Depressing the key for a further 2 seconds will

increase the rate of repeat.

After the correct time is entered, press the SET key to end the clock setting. The word

SET will be turned off and flashing will stop. The display now shows the current time

and day as in Figure 3.

REVIEW AND SETTING PROGRAMS

The unit can be set for daily or weekly event. You can choose the program to activate

on a particular day, Monday to Friday, Monday to Saturday, Saturday to Sunday, or

everyday. You can set a maximum of 14 programs. To review the various programs,

push either the left/right program arrow key. When the right arrow key is pressed, the

LCD display will scroll through all the programs in the following sequence.

CLOCK-> PGM 1 ON -> PGM 1 OFF -> PGM 2 ON -> PGM 2 OFF ->... PGM 14 ON->

PGM 14 OFF -> CD PGM-> CLOCK

Press the left arrow key will have the same effect except the sequence is reversed.

Push both keys at the same time will return to clock display.

The PROG symbol will display to denote the program is being displayed. CD PROG

will display to denote the Count Down Program is displayed. A sample of the program

is shown in Figure 4. Please note the display will show --:-- when the program is not

set.

All programs can be reviewed by simply holding down the left or right arrow keys: the

display will scroll through all the programs in sequence. Press the key one at a time to

view programs one by one.

EXAMPLE OF SETTING PROGRAM 1:

MO 8:15 ON / MO 15:45 OFF

In the above example, the timer will turn on at Monday 8:15 and off at 15:45. To set

the timer on at 8:15, press the right arrow key or left arrow key until PROG 1 ON

appears on the display, then press the SET key and the word SET will display.

With the Day flashing, use the left or right arrow key to select a day for which the

program 1 to be turned on and off. The day display will sequence through each day

and then MO – FR, MO – SA, SA – SU, MO – SU and then repeat again.

In this example, the day would be Monday. Press the SET key. When the hour is

flashing, adjust the HOUR to 8 using the left or right arrow key, then press the SET

key. When the Minute is flashing, adjust the MINUTE to 15 using the left right arrow

keys, then press the SET key to end the setting program. In Figure 4 the display

shows the timer before it’s being set and in Figure 5 the display shows the timer after

it’s been set.

To set the timer off at 15:45, follow the same steps as setting the ON program.

Note; the HOUR and MINUTE can be set for the program time but not the SECOND.

RANDOM FUNCTION

This timer has a built-in random function to automatically turn the time on and off at

random intervals. The timer will stay on for approximately 10 to 26 minutes and off 26

to 42 minutes. By pressing the RANDOM key, the symbol RND will flash indicating that

it is active. When the random function is active, all the preset programs including the

Count Down Programs are disabled and remain disabled until the random generator is

turned off by pressing the RANDOM key again. Manual Override is also disabled.

MANUAL ON/OFF

This timer can be turned on or off anytime (except when Random/function is active) by

using the ON/OFF key. Press the ON/OFF key to turn the time on. Press the ON/OFF

key again to turn the timer off. The LED indicates the timer is on or off. The flashing

word ON or OFF indicates that manual on/off mode is active.

The manual override mode will be cancelled when a preset program or countdown

program is activated. The ON/OFF word on the clock display will then stop flashing.

TRACEABLE

OUNT

DOWN

CONTROLLER INSTRUCT

IONS

1 2

CONTROL COMPANY 2

Indice de contenidos

Pagina 1

Pagina 2 - CONTROL COMPANY

Comentarios a estos manuales

Sin comentarios

Sanyo PDG-DXL2000 User Manual (60 pages)

Brand: Sanyo | Category: Projectors | Size: 2.74 MB |

Network Set-up and Operation

Compliance

Safety instructions

Table of contents

Chapter 1

Preparation

Features

LAN Terminal

Expression/Abbreviation

Use of this manual

Trademarks

Flow of installation

Chapter 1 Preparation

Chapter 2

Setup Procedures

Network configuration

Connecting to the LAN line

Network PIN code

Network information

Network PIN code screen

Network factory default

Chapter 3

Basic Setting and Operation

[1] Enter the IP address

[2] Login

Set button

Radio button setting

Check box setting

Initial setting

Network PIN code setting

PJLink and password setting

What's PJLink?

PJLink Notice

E-mail setting

3 Setting SMTP authentication

4 Setting POP server

Error information

When PJ needs service:

SNMP setting

Chapter 4

Controlling the Projector

Standby button is pressed

About projector condition

Item Description

Volume

Image adjustment

PC adjustment

Setting up the projector

Setting 1

Setting 3

Setting 2

Click this button to

Indication of the lamp status

Chapter 5

Appendix

Examples of connection

Use of telnet

Command list table

Web browser setting

Examples: OS/Browsers

Proxy setting

Netscape Navigator v.7.1

JavaScript Setting

MAC OS X v 10.4

Installation/Access

Chapter 5 Appendix

Version of the

SANYO Electric Co., Ltd

More products and manuals for Projectors Sanyo

Models	Document Type
PLC-XW200	User Manual Sanyo PLC-XW200 User's Manual, 1 pages
POA-RCKIT04	User Manual Sanyo POA-RCKIT04 User's Manual, 4 pages
POA-PN40	User Manual Sanyo POA-PN40 User's Manual, 86 pages
PLV-30	User Manual Sanyo PLV-30 User's Manual, 40 pages
PLC-EF10NAL	User Manual Sanyo PLC-EF10NAL User's Manual, 58 pages
PLC-XR2200	User Manual Инструкция по эксплуатации Sanyo PLC-XR2200, 76 pages
PLV-Z4000	User Manual Инструкция по эксплуатации Sanyo PLV-Z4000, 60 pages
PLV-Z800	User Manual Инструкция по эксплуатации Sanyo PLV-Z800, 60 pages
PDG-DSU30	User Manual Инструкция по эксплуатации Sanyo PDG-DSU30, 51 pages
PLV75L	User Manual Sanyo PLV75L User Manual, 60 pages
PLC-XM100	User Manual Sanyo PLC-XM100 User Manual, 1 pages
LP-ET30L	User Manual Sanyo LP-ET30L User Manual, 1 pages
WXGA PLC-WM5500	User Manual Sanyo WXGA PLC-WM5500 User Manual, 2 pages
3000 ANSI LUMENS PLC-XU305	User Manual Sanyo 3000 ANSI LUMENS PLC-XU305 User Manual, 1 pages
PLC WTC500AL	User Manual Sanyo PLC WTC500AL User Manual, 89 pages
PLC-XE40	User Manual Sanyo PLC-XE40 User Manual, 6 pages
PLC-XM100L	User Manual Sanyo PLC-XM100L User Manual, 28 pages
DSU21B	User Manual Sanyo DSU21B User Manual, 38 pages
PLC-WM5500	User Manual Sanyo PLC-WM5500 User Manual, 60 pages
PLV-70	User Manual Sanyo PLV-70 User Manual, 48 pages

Nova-tech 5095 TRACEABLE COUNTDOWN CONTROLLER Manual de usuario